Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: https://er.nau.edu.ua/handle/NAU/58585
Название: Development of the measuring channel of the pressure distribution system on the surface model of the aircraft during the experiment in the aerodynamic tube
Авторы: Марчук, Роман Миколайович
Marchuk, Roman Mykolaiovych
Носко, Павло Леонідович
Nosko, Pavlo Leonidovych
Башта, Олександр Васильович
Bashta, Oleksandr Vasylovych
Ключевые слова: modern aircraft
aerodynamic test
wind tunnel operation mode
measuring channel
Дата публикации: апр-2021
Издательство: National aviation university
Библиографическое описание: Марчук Р., Носко П.Л., Башта О.В. Development of the measuring channel of the pressure distribution system on the surface model of the aircraft during the experiment in the aerodynamic tube / ПОЛІТ. Сучасні проблеми науки: ХХІ міжнар. наук.-практ. конф. студ. та молодих учених, 5-9 квітня 2021 р.: тези доп. – К., 2021. – С. 59-61.
Краткий осмотр (реферат): The development of modern aircraft construction is impossible without accurate aerodynamic tests (weight, drainage, strain gauge, flutter, bench, calibration), because they: allow to determine the aerodynamic properties of all aircraft and their parts; provide an opportunity to study the basic characteristics of the flow, especially when they are combined with methods of theoretical analysis. At the same time, the statistical analysis of the wind tunnel operation mode shows that the main disadvantages of drainage tests are the outdated and cumbersome system for determining the pressure at points with the help of liquid manometers. The expediency of using a strain-resistive semiconductor sensor HoneyWell Ultra Low Pressure Sensors, which has indisputable advantages among others, namely: compactness; the measurement range is 0.01% of the atmospheric pressure. To reduce the temperature error of strain-resistant transducers, the efficiency of using analog compensation devices based on the method of using temperature-dependent resistors is substantiated. The method of digital error compensation and the possibility of its use during modeling of the measuring channel are investigated. The structural scheme of the measuring channel is developed.
Описание: http://aki.nau.edu.ua/wp-content/uploads/%D0%97%D0%B1%D1%96%D1%80%D0%BD%D0%B8%D0%BA-%D1%82%D0%B5%D0%B7-2021.pdf
URI (Унифицированный идентификатор ресурса): https://er.nau.edu.ua/handle/NAU/58585
Располагается в коллекциях:Матеріали конференцій кафедри прикладної механіки та інженерії матеріалів (НОВА)

Файлы этого ресурса:
Файл Описание РазмерФормат 
Тези_Марчук_англ.pdf132.62 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.