Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: https://er.nau.edu.ua/handle/NAU/58585
Назва: Development of the measuring channel of the pressure distribution system on the surface model of the aircraft during the experiment in the aerodynamic tube
Автори: Марчук, Роман Миколайович
Marchuk, Roman Mykolaiovych
Носко, Павло Леонідович
Nosko, Pavlo Leonidovych
Башта, Олександр Васильович
Bashta, Oleksandr Vasylovych
Ключові слова: modern aircraft
aerodynamic test
wind tunnel operation mode
measuring channel
Дата публікації: кві-2021
Видавництво: National aviation university
Бібліографічний опис: Марчук Р., Носко П.Л., Башта О.В. Development of the measuring channel of the pressure distribution system on the surface model of the aircraft during the experiment in the aerodynamic tube / ПОЛІТ. Сучасні проблеми науки: ХХІ міжнар. наук.-практ. конф. студ. та молодих учених, 5-9 квітня 2021 р.: тези доп. – К., 2021. – С. 59-61.
Короткий огляд (реферат): The development of modern aircraft construction is impossible without accurate aerodynamic tests (weight, drainage, strain gauge, flutter, bench, calibration), because they: allow to determine the aerodynamic properties of all aircraft and their parts; provide an opportunity to study the basic characteristics of the flow, especially when they are combined with methods of theoretical analysis. At the same time, the statistical analysis of the wind tunnel operation mode shows that the main disadvantages of drainage tests are the outdated and cumbersome system for determining the pressure at points with the help of liquid manometers. The expediency of using a strain-resistive semiconductor sensor HoneyWell Ultra Low Pressure Sensors, which has indisputable advantages among others, namely: compactness; the measurement range is 0.01% of the atmospheric pressure. To reduce the temperature error of strain-resistant transducers, the efficiency of using analog compensation devices based on the method of using temperature-dependent resistors is substantiated. The method of digital error compensation and the possibility of its use during modeling of the measuring channel are investigated. The structural scheme of the measuring channel is developed.
Опис: http://aki.nau.edu.ua/wp-content/uploads/%D0%97%D0%B1%D1%96%D1%80%D0%BD%D0%B8%D0%BA-%D1%82%D0%B5%D0%B7-2021.pdf
URI (Уніфікований ідентифікатор ресурсу): https://er.nau.edu.ua/handle/NAU/58585
Розташовується у зібраннях:Матеріали конференцій кафедри прикладної механіки та інженерії матеріалів (НОВА)

Файли цього матеріалу:
Файл Опис РозмірФормат 
Тези_Марчук_англ.pdf132.62 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.